Kodak EasyShare P850 Digital Camera "fix flash" Questions

fix flash on kodak z740 the flash doesn't work any more on my kodak z740 how and where can i fix it to try if the flash is working.. *Turn off the camera. *Install a set of new or fully charged ...

flash doesn't work Can I fix this problem myself? Flash stopped working. New batteries. Takes great outdoor pictures. i just pulled my camera apart and found that 1 wire to flash was broke I soldered ...

It is eathe the bulb or the flash circuit. if you are going to fix it yourself watch out for the flash compasitor. If you are going to send it in watch the cost. It sould be fairly cheap to have fixed

cost to repair. Thanks Sounds like you might need a new bulb. I just looked up on kodak.com They have all kinds of parts but the labor to fix it can be expencive says it about $138.00 to fix the flash

...fix/replace my flash on a Kodak EasyShare I Need to fix/replace my flash on a Kodak EasyShare Z650 10X zoom camera. Can I attempt to do this repair my self? Is there a place on-line that I can buy a ...

...flash quit working. Can I fix it myself? If you know what is wrong, you could perhaps fix the problem. But not knowing if it is a defective switch, a broken flat cable, the capacitor, or even the ...

...Working my kodak easyshare c143 flash is not working in any mode.. plz help me how to fix this ? Hello, Your problem is not one that is fixed by consumer, it will need to be repaired by a camera

...fix? Will the flash need to be replaced all together? Hi, a daft question I know but you have pressed the flash button (right hand side of the group of three on top) to change flash mode and is it ...

...fix the problem I had the same problem with my flash not poping all the way up. I decided there must be a spring that is not pushing the flash up. Looking for small springs I took apart push button ...

...flash & try another picture over & over till it works. It needs a repair. Contact KODAK: http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490 Not ...