Lexmark E238 Laser Printer "stopped photoconductor kit" Questions

STOPPED BECAUSE THE PHOTOCONDUCTOR KIT WHAT CAN I DO TO OVER RIDE THIS WITH OUT REPLACE IT Here is how to reset the photoconductor kit counter: 1. Make sure the new kit is installed and the printer is

...Photoconductor Kit message and possibly stop printing. IMPORTANT! The photoconductor page count should be reset only when a brand-new photoconductor kit is installed. Resetting the page count without ...

...stopped because the photoconductor kit has reached the end of its useful life. Please replace the photoconductor kit to prevent printer damage and continue printing." Could this message be ...

photoconductor kit in and it is still flashing Please make sure to reset the printers' pc count. Below are the steps. 1. open the front cover. Leave the printer powered on. 2. With the front cover

...photoconductor kit. Here is the link for the user manual: images.lexmark.com/publications/pdfs/w840/eng/ug.pdf To ensure print quality and to avoid damage to the printer, the printer stops operating ...

stopped because the photoconductor kit has reached the end of its useful life. What is the photoconductor kit? Is it the same as the Imaging drum T J987? Not sure about the part #, but photoconductors

...stopped because the photoconductor kit has reached the end of its usefull life. Please replace the photoconductor kit to prevent printer damage and continue printing. Is there a tab or a certain step ...

...stopped because the photoconductor kit has reached the end of its useful life." What is a photoconductor kit and how is it fixed/replaced? The photoconductor kit is another word for the drum or ...

...Photoconductor Kit message and possibly stop printing. IMPORTANT! The photoconductor page count should be reset only when a brand-new photoconductor kit is installed. Resetting the page count without ...

...stopped and I got a message that the photoconductor kit had reached the end of its useful life. I obtained a replacement photconductor kit and installed it, but I still get the same message. Can you ...