Question about Microsoft Xbox Video Game Consoles & Games
controller port usb pins are bent The pins in the usb controller port are bent and or broken.Someone forced the controller wire into the port. How can the 2 usbs be replaced?Thanks,Daniel is it in the
...controller port does not connect. The other three work fine. I have switched the controllers around, they all work fine form the other working ports. Hello, It sounds Like a bad port, You can try and ...
Question about Microsoft Xbox Video Game Consoles & Games
...controller. Is there a way I can fix this my self or do I need to send it back????? The usb ports are soldered onto the mainboard and would require quite a bit of technical knowlege to replace. You ...
Question about Microsoft Xbox Video Game Consoles & Games
My Xbox works but does not recognise controllers My Xbox works but does not recognise the 2 controllers in any of the 4 ports. How do I fix it. SUDA [email protected] Have you tryed diffrent ...
Question about Microsoft Xbox Video Game Consoles & Games
...port is on the back of the system) Wireless Controller: 1)Press and hold the Xbox guide button until the controller turns on. 2) Make sure that the console is on, then press and release the connect ...
Question about Microsoft Xbox Video Game Consoles & Games
...controller light up, indicating which port you are connected to. You should also see a corresponding port light in the ring around the power button of your Xbox 360 system 8 Press the "Connect" ...
...Panel. ClickSystem and Maintenance. ClickDevice Manager. Double-clickUniversal Serial Bus controllersand check to see if all your USB ports, hubs and controllers are functioning correctly. ...
controller port/power issue Connection in controller port on X360 snapped off in controller - did not know this and tried to connect controller - made an electrical static noise - quickly powered off ...
Question about Microsoft Xbox Video Game Consoles & Games
...port located on the front of the controller. Then press the button located to the right of the memory expansion ports on the Xbox 360 console. This should re-sync your controller. Hope this helps, ...
...on box it goes to time and date screen but will not respond to controllers I have tried controllers on other xbox and they work Hi, Controller Port Inputs Blown. Try Ports 3 & 4. Mike @
1,498 questions posted
Usually answered in minutes!
21,069 Questions
747 Questions
281 Questions
262 Questions
173 Questions