NEC MultiSync 1940CX 19" LCD Monitor "sub 1" Questions

...sub No signal /Video input 1 DVI-D No signal NEC MultiSync LCD 1770GX Good Afternoon... I have had a NEC Monitor for quite some time now giving me a new signal error...Video input 2 D-sub No signal ...

1 D - SUB NO SIGNAL" each time I turn the moniitor off an on again. I checked all connectivity to the computer, outlets and monitor and everything is intact. Please help My suggestion is going to

...from power saving mode connected by HDMI. (Cable and cpu checked) The monitor runs perfectly by D-sub, but the quality is obviously not the same. If I connect an other monitor by d-sub, and the lg ...

...1/2 a second and then on again... like a loop. I?ve disconnected everything and connected it back again, and it did the same. I?ve also connected it to another PC with no success. I?ve read somewhere ...

...LCD 1935NXM. Thanks. You have 3 ports on your graphics card(VGA - 15 pin D-Sub x 1, DVI x 1, and S-Video x 1)Now if you want to use DVI just connect the DVI port to your monitor thats

...1 D-SUB OUT OF RANGE) can you help. I cannot see the screen without holding flashlight up to it. Thank You. Not sure what the D-sub out of range means.. but if you have to hold a flash light to the ...

Where can I get a user manual forthis product try this site. http://www.iiyama-monitors.co.uk/categories/monitors/iiyama-23-and-24-inch-Monitor.aspx

...1:D-SUB & 2:DVI-D &3:S-video &4: COMPOSITE a test colors with 4 bars. In the back :May 2004 B9G and a lond code CN-OCO881-46633-45N-25FL REV A00 Since the cable you're describing is a VGA ...

How to open the cover to reach the power supply unit. Monitor switches off every other hour by itself. Look at this page http://www.wizardanswers.com/liquidvideorepair.html and see if your monitor is ...

my screem has flipped so that when i look at the screen it is sideways An upside down display - This is caused by unintentional pressing Ctrl-Alt plus the down arrow key. Restore by pressing Ctrl-Alt ...