NEC LT35 Multimedia Projector "flashing temp light" Questions

my projector is overheated with temp light flashing. how can I fix it? If only the TEMP light is flashing, then it means the fan has broken down. You will need to send it to Dell to get it fixed.

...flashing "TEMP" light : "The cooling fan is not operating. Turn the power OFF and wait approximately 20 minutes. After the main unit has cooled down, please make confirmation that no foreign matter ...

...then only standy light flashes. What is the meaning of this please. Max I also problemma which has strobing - standby/on, temp and lamp lights.This happens as soon as it is plugged into

...temp light blinks red. I have checked the cleaned the air filter, but I still can't get it to come on. Any suggestions? Hi, if the Lamp error and Temperature error lights are flashing red this means ...

...and the power light flashes green, with the temp and lamp lights flashing red. Before changing lamp use a canister of compressed air to remove dust specially inside the projector when lamp is

...temp light is red and wont start fans or light just the standby light on flashing could this be a ballast issue or thermal sensor? if you projector auto shut down, and Lamp LED Light - Check Lamp - ...

...TEMP light is flashing When the machine is powered up the green power light comes on and the fan can be heard about 5 seconds later the machine powers off and the FAN/TEMP light flashes. What does ...

...Temp. red light came on. Power Light turned red instead of orange as usual. After 3hrs I turned it back on, cleaned the dust off the fan and the Temp. light did not come back on. There are three temp ...

...temp and lamp lights flashing, overnight, and in the morning, they were off. The blue power light was flashing, indicating standby mode. It powered on! I had the unit stored in a cold basement so I ...

...flashing and according to the manual this indicates a temp problem. I have left the unit in stanby and then switched off at the mains, the switched on and still the status light comes on. Help!!! We ...