RCA HD52W59 HDTV Projection Television "surround system turn" Questions

surround system out of play it is a sound problem inside the set. I would bet it will work that way---FYI if you are using a cable or Satellite box---it could also cause the problem if it is supplying

...because there is no sound. Get a surround sound system. Run the video to av1, and then the red, and white audio cables to your surround sound aux. You will get the clean picture and great

...surround sound, but the home theater system plays fine. how do i connect it all so that i'm in home theater mode all the time? On the back panel of your tv you will see two audio inputs labeled AUDIO ...

...surround system during this time but no picture. #2 My sound would crackle and pop every once and a while until now it does nothing. I have to watch it with the surround sound on. HI I have RCA 61" ...

...surround sound input. My system is broken so I need to turn the tv speakers back on. Manual isn't clear After I reset the system, the Audio menu gave me access to the TV speakers that had been turned ...

...surround sound system, no problem. Any suggestions? if there is no problem with the surround sound, you have a problem with the volume regulation circuit or with the main amp of this TV set, But to ...

...speakers pioneer pep4214hd Your problem should be solved by going into the menu and going to audio section, and turning off internal speakers. I guess you want to connect a surround sound

internal mute on and using surround sound system? Fault at its light engine. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com

surround sound system all has that small dark red window. If none, it may because and to my understanding, the Kenwood KRF-V4070 remote control uses RF (modulating the amplitude of the electromagnetic

surround sound system, the speakers need to be OFF. When used in a stand alone mode, they need to be turned ON. Someone may have turned them OFF in the audio settings. That's the easy fix. If there is