Ricoh Aficio CL7200 Laser Printer "printers warming" Questions

Doesn't go past warmup. The printer (Ricoh Aficio CL7100) says it's warming up, but doesn't make any sounds like it normally does, and doesn't get past saying warming up. you need check: 1) there are ...

codigo sc 552 ricoh 3800 SC 552 - Pressure roller warm-up error Definition: After the main switch is turned on or the door is closed, the pressure roller temperature does not reach the ready ...

Paper jams in heater Hello An overheated fuser is one of the most common causes of a paper jam. When large loads of print jobs are pushed through a printer, the fuser slowly starts to warm up. As the ...

error code sc545 The printer doesn't work That's a fuser warm up error. Likely either a blown fuse, lamp or thermistor. Fuser is usually replaced as an assembly, and code can only be reset in "service

Hi, I have a Ricoh Aficio Laser Color Printer model AP204. When I press Power button, my printer seems to work fine (warming up) for a few seconds, and suddenly get on printer screen the next message:

Printer does not load toner Hi I have a Ricoh AP3800C and it tells me to load black toner. I have tried several new toners but the same message appears after warming up. It was working fine before ...

my printer start showing error sc542 what to do? error sc542 showing in my printer i tryed to type 107 and then green button, but it went to fax maintenance mode. what to do? plz help itz urgent SC542

SC 542 Heat roller warm-up error and for that you will need a technician since the machine may need some part replacement what parts replace the hot section (fuser) and reset with sp code 5-810

the toner is powdery on printed work It seems that the toner is not fusing to the paper. It is powdery and can wipe off. The fuser is broken. If you open the printer area that gives access to the ...

sc552 Pressure roller warm-up error pressure roller thermistor bad or dirty