Samsung SyncMaster 740N 17" LCD Monitor "blinking blue light" Questions

...blinking blue light You have problem with the psu.Three capacitors 820mF/25V are dead and there is a fuse 3A worn out hi, I have same no display but blinking blue power button light prob.I opened the ...

...blinking blue light and no image display no image, blinking blue light only, no self test image Here's some tricks I would try... 1. Verify the monitor's power cord is plugged firmly into the wall ...

...blue light starts blinking fast and after a while (keeping the heater source) it starts working. whats happening what should i do? I would check the plug on the lcd for bent pins the wire both ends ...

blue power button blinks why ? There is probably a failure of part of the power supply pcb. If the light blinks and the screen is totally dark, this is the likely cause. The usual culprit is decective

...blue light around the power button lights up but it starts to blink and every time it blinks the screen will show and go back out tried different cables but same prob please help thx in advance This ...

Blinking blue light and no display We have had power failures the past few days due to wind and snow. Every time the power fails the moniter will not turn back on when I turn the computer back on. ...

blinking blue light i have a syncmaster 931b and when i turn it on the blue light shows but would blink twice. the monitor however won't turn on. You have to check if you can see the image on the ...

...940B monitor has gone black and when I plug into computer blue light blinks but the monitors won't display my desktop what is wrong? when i turn on the monitor, it is on for few seconds and turns ...

The screen will not come on when you power the tv the light blinks green on and off for a few minutes, but the picture (blue screen) never comes on. i think lose power i hope i can solve your problem

...blue light(where i turn the monitor on) just blinks.It worked normally yesterday. The most common problem with the 940N units is a failure of the power supply/back light inverter board. This is easy ...