...Index delay values) we still have the same color and picture problems. Do we have to replace the DMD board?? or is there another problem. Or are we being duped by the person that sold us the color ...
Question about Samsung HL Televison & Video
...index delay after the replacement. You will be able to tell because you may see strange color banding in any scenes that have colors close, but not quite the same, in tone. This is usually most ...
...Index Delay Values on it) I set the Index delay to 47 and the Actuator to 113 as per the 'Service Bulletin' from Samsung. The same color and picture problem still exists, that caused me to change the ...
...to do? Thanks! You have to replace Color Wheel in Optical Block ASAP! Particles of shattered class have to be removed before installation of new part. Index delay have to be adjusted in service
Question about Samsung HL Televison & Video
...delay index and tried to adjust it but it won't work. The colors are just not right. How do I get the colors right? Check if instructions with color wheel show a jumper on DMD board for an upgraded ...
the DMD is replaced and the light engine is returned, a mechanical alignment must be done and then the technician pulls up the service menu and aligns the Index Delay and SP actuator. Hope this helped
Question about Samsung HL Televison & Video
...to use professional help because you can make more damage to the optical engine. Not to mention index delay have to be re-adjusted in special service menu after repair is complete. Regards.
...Ask a local samsung servicer to do an "index delay" adjustment in the service menu. Did you switch from a bearing Color wheel to an air type bearing? If so,you have to remove the jumper on the
...to try to reset the wheel speed using the index delay parameter in the service menu. They should be able to eliminate the problem or at least identify it as a bad color wheel or otherwise. ...
...it , that corrects most of the problem, the color then needs to be touched up. With the set off, you press mute-1-8-2-power, select ddp1001, then index delay, adjust the bar is a uniform red
18 questions posted
Usually answered in minutes!
445 Questions
373 Questions
297 Questions
280 Questions
244 Questions