Samsung HL-R6167W 61" HDTV "dlp blinking light codes" Questions

...dlp tv wont turn on, blinks lamp light green and temp light red I've had this TV for over 10 years, it has been used more than any TV ive ever owned. When I used it last it would work for ...

...DLP sets) will try 3 times to get the lamp lit before the microprocessor will give up and then the 3 lites on the front will blink indicating a LAMP failure. This process takes about 1 to 2 minutes. ...

...light flashes red or green for a few seconds this is a code that you haveto read eg if 3 flashes then start again it means there is a problem read in between the flash code go to google put in the ...

...DLP samsung and it wont power on after making a lot of noise (I replaced the lamp) worked fine for a few days now the red light and the right side green light is blinking. any sugge the TV worked ...

...dlp will turn on with no picture (sound is OK), then will seem to turn off, then back on again without me doing anything. After this ritual being repeated, the lamp and power lights will start to ...

...light blinking. Sound but no picture. I would suggest if you haven't done so alreay is replace the projection lamp. The symptom you are describing indicates a failing lamp. The lamp part number will ...

dlp samsung I have a tv that when push button to turn on the it comes on for about 2 seconds, and then lights up lamp and stand by, then automatically shuts off. There are instructions to replace the ...

DLP won't turn on. 3 lights on front blinking indicating the lamp is out but I have replaced it and it still won't turn on. Someone suggested it could be the ballast and I replaced it as well. Still 3

...DLP TV. One day the picture went out on the tv, sound was still present, and the lamp and temp lights blinked on the front. After trying to replace the lamp, and the tv still exhibiting the same ...