Samsung LN-S2651D 26 in. LCD Television "hdmi input" Questions

HDMI input is not working. Was working fine then it's like the cable was cut. the TV does not even let me switch to that input. one day started working again out of no where and died a few hours later

...hdmi input at all times and switch devices with the home theater remote. All the devices would be connected from their respective outputs to a respective input on the home theater. Another option is ...

...HDMI input, press button SOURCE on the remote control. You must see all the inputs there. If you don't see, keep rolling down the arrow button. You will see it. When it got highlighted, press Enter, ...

samsung ln32c540 hdmi not working but cable in does Possably the wrong type of HDMI cable, Wrong resolution being input to it, not switching the input mode, or a defective HDMI port on the TV.

...HDMI input before. I just bought a PS3 and when I connect it to my TV via HDMI is says "Not supported mode". It started working again but with no sound and it finally went back to the "Not supported ...

i have a samsung tv and samsung blu ray i have my dvr in hdmi 1 and my blu ray in hdmi 2. when i first turn on my tv and blu ray it works fine but if i switch to cable the back to blu ray it says no ...

...HDMI 1 input... Hi chaz, I see that your HDMI 1 is having problems when used and on the HDMI 2 everything is ok and clear. I believe this cannot be fixed since this is going to be a hardware issue, ...

HDMI INPUT FOR NON HIGH DEF CHANNELS WILL NOT DISPLAY FULL SCREEN I just purchased a samsung ln46a650a1f lcd tv. The HDMI input displays HD channels in full screen mode ok. When viewing an non HD ...

...HDMI input is marked as DVI on TV). I suppose that over HDMI the TV supports only some standard resolutions, but over VGA it supports almost every resolution laptops use. You can find supported ...

HDMI input says "mode not compatible" I have my PS3 plugged into the HDMI input. Once I turn it on, my tv searches for the signal for the input source and then says 'mode not ...