SanDisk Sansa m200 (2 GB) MP3 Player "instructions work 1" Questions

...instructions to "fix" the problem; leave battery off for 1 hour, update firmware, and re-format. I tried everything, nothing worked. Sent e-mail to SanDisk for more instructions. Just want to know if ...

instructions: 1. Open "My Computer". 2. Turn off the Sansa Clip. 3. Put the device in Hold (move Hold button until orange is showing). 4. Press and hold the Center Button. 5. Plug the 30 pin connector

...work. If it does not try Powercycling your device (turn it off and then turn it on). 5. Try other modes as well. Keep the device in AutoDetect Mode and follow the instructions below: ...

...instructions??? Try a hard reset. Press and hold vol + and select for 20 seconds. If that doesnt work, you can try holding the power button for 30 seconds. Try to restart after either trial. If that ...

...work properly you need to meet the requirements below.- Windows XP SP2 or higher- Windows Media Player 10 or 11To Download the Sansa Firmware Updater, you may copy and paste this link to the address ...

...instructions if this does not work. Reseat the battery. Resetting your player: 1. Press and hold the Power/Menu button for approximately 20 seconds. 2. Release the Power/Menu button. 3. Press the ...

...work for you if it does email me at [email protected] o man, i had the same problem as jcs, eric u dah man, i followed ur instructions and now my sansa is working again! thanks a lot thanks, this ...

...instructions under me ( there's more but I only copied where I got up to). Everything was working just fine until when I entered the sansa program it said something that it couldn't read because it ...

...instructions in installation. If that doesn't work contact Sansa support there is a good chance they will replace the player for you . I've had things go wrong with mine twice and the've replaced it, ...

...work sandisk should be able to help you out. 1-866-726-3475 or 1-866-sandisk -Reset device take out battery hold power button for 30 count put battery back in turn device on. -Upgrade firmware Go to ...