SanDisk Sansa e260 MP3 Player "reset ipod" Questions

ipod..... seems to be hung........how do i reset it ? the display is on but no actions are being executed Hold the power button of your Sansa for 15 seconds, this will reset and power down your device

...iPod into Disk Mode it may need to be reset before you can use it. If you cannot put iPod into Disk Mode after performing these steps, it may need to be repaired. You can arrange for repair at the ...

...ipod mains charger and now it is dead! You can try and reset your sansa and see if this fixes the issue. Connect the proper USB cable to yoru Sansa the Press and hold the Power On button and the Play ...

...in for a while then after a while hold the menu button (top of the dail) and the middle button down together for 5 seconds and this will reset your ipod and if enough charge is in it,it should start ...

ipod "Road trip" Charger/FM transmitter I figured since the port on the bottom of the sansa looked the same I docked it to play through my car radio and nothing turned on. I disconnected the Sansa and

the player which can be pressed with a offfice pin to clear up the hanging condition. If the screen does not turn on even after the reset is done , the fault can be failure of the hardware in the Ipod

...reset it back to its original factory default settings. hi i have a problem with my ipod the main problem is when i want to turn it on it shows me name of model - it means is loading but after it ...

ipod [?] mp3/mp4 player - lsd_9301_10 I don't know what this device is, which makes it difficult to begin to figure out how to reset it. My wife doesn't remember where she bought it or too much about ...

IPOD any advice email [email protected] Reset the player first - that should get rid of the message. Is your mp3 player a Sansa player, or an Apple iPod - both of them have a recovery method which you

...reset and see if the ipod resumes. if  the ipod is still not detected then it is possible that there is errors within. allow battery to drain off fully and see if the fault ...