Sceptre X37sv-Naga 37 in. LCD Television "remote working" Questions

...while pressing the remote buttons if you see the light then the remotes working and you most likely need to replace the IR sensor. You can get the remote and the IR sensor from ...

my remote does not work bought a replacement remote online RC-024. Does not work; replaced batteries; still nothing? Remote Code for LCD Coby TV model TFTV2425 - Comcast Help and ... ...

remote just stoped working. No matter what i did i could not get it to work. I then went and get another remote and i cant get the universal remote to work? What should i do now? Some more suggestions

Remote sensor does not work. Have tried three different remotes Tv works fine. Just can not get a remote to work. Reset tv to factory settings, removed batteries from remote and pushed all buttons, ...

...working or either remote t.v or direct tv remote To diagnose a remote control problem follow these steps. 1) unplug the TV power cord, count to five and plug it back in. (reboot) 2) try to power on ...

...dead or broken. If other remotes do not work, your repair person may not have connected the remote sensor within the TV during the repair. I hope this was helpful. my remotes not working 50 pc ...

...working. Hi, Remote sensor seems bad in your KDL-40D3000 that will be replaced because it is unable to receive remote infra red signals and remote has been tested on other tv and found good. Please ...

Remote code I have a viewsonic flatscreen TV and need a code in order to use my dishnetwork DVR Remote. Tried all remote codes listed in Viewsonic and dish web sites ,also talked to support for both ...

...remote to make sure it is working. Check out this site, and also check on the Troubleshooting page. Also check to see if they might have the remote for your tv. Hope this helps. good luck. ...

remote stopped working, I found a compatible remote @ http://www.remotes-express.com/Ilo/E7501-051009.html. The codes mentioned by Queentut did not work for me. www.remotes.com if u are looking for io