Soyo DYLT032D 32 in. LCD Television "tv input" Questions

INPUT 4 BUT TV WILL NOT STAY ON LONG ENOUGH The reason your tv is powering down is that it is not receiving an input signal on the channel (input). basically you don't have anything plugged in and

tv is on wrong input. Be sure HDMI wire or cable input is connected to tv. Look at which input it is on. ( like HDMI 1. Or cable etc. take tv remote (with cable box on ) press input / video button and

same goes with TV button located on the front or side of it ). Once you have the input lists, check one by one in order for you to check the right input of your TV ( usually TV input ). Hope it helps

Cable TV works for picture and audio on TV. None of my inputs are responsive to connecting satellite service. Is there a possibility that the inputs have been 'locked'? Or is there a module in the TV ...

...TV HDMI input(s) are used, they are output to the TV optical output and should be connected to the amplifier optical input. The amp input associated with the optical input should be selected to hear ...

...tv audio video input and turn it on. On your tv menu select video input. If you see 'tv\video' on the button switch of the remote control or tv switching panel, press it. Just used the AV component ...

...tv input is now stuck on component input for my cable box, but I am unable to switch it to any other input. mine did the same and i have been told that it is the mother board how do you even get into ...

...tv input keeps does not stay on the correct input eg. av1 even though it is the only device hooked up to the tv. After a short period of time it starts to scroll though the other inputs and stops on ...

tv's on hdmi input 1 all 4 of my hdmi inputs show that input until I change the input for my x-box to hdmi input 4 then turn off my tv then turn it back on. I have to do this in order for it to switch

...the input on your tv to match the input you have plugged into. (ex. if you plug into input 1 then your tv needs to be set to input 1) . This is done by hitting the source button or the input