Maytag MSD2756G Side by Side Refrigerator "door hard open due" Questions

...door is very hard. Very common problem, due to full power of magnetic gasket. It's my own experience but some other brand, the solution is: Don't close the door roughly or even don't allow fast to ...

...door from sticking too much and making it hard to open Its a one year old fridge and it suddenly became hard to open both freezer and normal doors. The rubber sticks harder together. Is this a ...

...door is very hard to open due to seal sticking Our new 642 freezer door is very hard to open as the seal sticks. Force needed is threatening to bend handle If the seal or seating area is sticky, wash ...

...door becomes hard to open... maybe try closing it slower/softer or place a "small" flat fridge magnet on the TOP of the door where the seal meets it, to allow for a small amount of air to prevent the ...

...door opens, so the cold is not lost as fast. So if the fan runs when you push the button in, then your problem is else where. The defrost timer could be bad and the evap coil iced up, if the timer is ...

door hard to open. We just got out power back after a 6 day power outage due to the ice storm. Now the freezer door of my refrigerator is hard to open. Any ideas as to why, and what to do about it? If

...and the display will start to drop in temp . Hard for me to put into words , except for , the temp reading will actaully be the same as the actual temp display , only when you FIRST open the door

door, and it bounced and was slightly open. Overnight, ice started to form all over the compartment, including inside the drawer guides. Some ice was probably obstructing the drawer glide from sliding

...door shutting. kind of hard to explain! hopefully, it makes sense. you need to replace the seal on that side of the door due to it being worn. The easiest way to replace the seal is to lift the seal ...

...door to hard follow it through with your hand on it and maybe put your other hand on the freezer dor to make sure it says closed. I have never seen a kit to solve that problem. We have the same ...