...draw as high as 15 amps but for no more then a second or two. After that it should run at 1-1.5 amp and will draw less as it continues to run. After 10 minutes it should pull anywhere from .5-1
Question about Kenmore Refrigerators
...amps rushing in and the motor generates a back emf of 6.6 while running the resultant draw is 1.4. Capiche?
If motor does not turn on after a cycle it is because the thermostat is not closing ...
...draw to see if it is drawing Locked Rotor Amps. Look at the name plate on the compressor and it will give you LRA.and see if it is close to it. Then check it again after you replace the start ...
what is L.R.A. for a samsung SK1A1C-L2W ? A rule of thumb for lock rotor amps is 5 times the running load amps. That unit probably draws 3-4 amps max when running so lock rotor probably 15- 20. If its
amps does a Daewoo FR-330 refrigerator draw? First off here is a copy of the service manual, for your future reference. http://www.daewoo.cl/sta-info/manuals/refrig/FR-330.pdf This is a 220 volt unit,
...many amps does the refrigerator have? in what area are you refering too during the defrost cycle it could draw as many as 8 amps the compresser may draw as much as 10 during start up and 5 when ...
...cools down and tries again. the normal amp draw for those compressors is 3-4 amps. Have you checked the condenser fan and made sure the coil is clean? unfortunately those compressors cannot be ...
...amps when the compressor is off. Norcold support says this is as designed and I should "return the unit to the place of purchase" if not satisfied. The unit is built in to the boat and requires ...
...draw and seee what amperage its pulling, circuit breakers that have popped get worse for it each time too, may be that too now! check wiring, amperage and breakers ability to take normal amp draws, ...
977 questions posted
Usually answered in minutes!
518 Questions
315 Questions
239 Questions
175 Questions