Maytag SkyBox MBV1976A Beverage Dispenser "vending machine problems solutions" Questions

...vending machine ... u need to open the main door and unplug the main harness , next remove the door from the hinges and place upside down somewere were it is good to work on ,next remove the 2 screws ...

skybox all lights flash when you press a drink selection and nothing happens the solution for my flashing lights/no beverage problem was so simple to solve. There is a small sensor right next to the ...

Does not cool anymore Sounds like compressor comes on for about 10 seconds and then goes off. Repeats after a few minutes. Used to work fine but suddenly does not cool at all. [email protected] check

Maytag Skybox I just wanted to thank you for providing the solution to the skybox cooling problem. I did not want to get rid of it but I knew Maytag would be no help. I would never have thought in a ...

when i turn the box on all it does is click. could that be the compressor or the relay switch. are either one of them available to buy. please reply as soon as possible. i love the box, but it will ...

My maytag skybox does not cool very well even when turned all the way to high. 1) your box may be low on freon, 2) fault thermostat may cause unit run non stop, causing evaporator to ice up and ...

Maytag Skybox The center two buttons will not dispense. The outside two does. The second one "trys" to dispense (motor kickes in, but sounds like something is jammed. The rotating drum feels free, ...

skybox by maytag quit cooling My sky box by maytag has quit cooling. Fan runs, otherwise seems fine. Is this a compressor problem? How do I go about locating someone who services these things? Where ...

My Maytag Skybox won't cool NOTE: This is a multi-solution answer since I don't have all the tech from your question to pinpoint your problem But the solution is in here generically, if you ...

Skybox won't cool enough. My temperature only get down to about 45 degrees. Do you have a solution for the mvb1976 model? you might need the compressor checked for freon level when the compressor ...