Xerox CopyCentre C20 Black and White Copier "fuser thermistor" Questions

Ad

Question about IBM Office Equipment & Supplies

1 Answer

...thermistor check failure. Fuser page count between 0 and 99,999. ? Noisy thermistor signal. ? Intermittent connection. ? Thermistor cable not connected or thermistor actually open. Go to ?924.xx?Hot ...

Ad

Question about Panasonic Office Equipment & Supplies

1 Answer

...Fuser Thermistor dirty. 2. Thermistor position incorrect. 3. Thermistor defective. 4. Thermistor connector disconnected. 5. Fuser Lamp connector disconnected. 6. Fuser Lamp defective. 7. Fuser ...

Ad

Question about Copystar Office Equipment & Supplies

1 Answer

...fuser unit thermistor temperature The fuser temperature remains below 90°C/194°F for 1 s. Poor contact in the thermistor connector terminals. Reinsert the connector. Also check for ...

Question about Xerox Office Equipment & Supplies

1 Answer

...fuser thermistor S temperature *35/37 and 45/47 ppm printers (EUR/USA model) only The temperature of the fuser thermistor S detects 250°C/482°F or more continuously for 3 s. ...

...fuser heat roller. Check the wiring to the thermistor assembly. Check the wiring to the NC thermistor, PL 10.28 Item 19. Install new components as necessary, PL 10.28. 5. Check for continuity between ...

Question about Xerox Office Equipment & Supplies

3 Answers

fuser thermistor M wire *35/37 and 45/47 ppm printers (EUR/ USA model) only Input from fuser thermistor M is less than 1 (A/D value) for more than 3 s. Poor contact in the fuser thermistor M connector

Question about Xerox Office Equipment & Supplies

1 Answer

...either disassembling the fuser and replacing the thermistor ( if you can find one) or replacing the fuser assembly. so i would suggest that take it to nearest service centre of lexmark. best of ...

Question about Panasonic Office Equipment & Supplies

1 Answer

...Fuser Thermistor is dirty. 2. Thermistor position is incorrect. 3. Fuser temperature is low. 4. Thermistor is defective. 5. Fuser Lamp connector is disconnected. 6. Fuser Thermostat is defective. 7. ...

Question about Xerox Office Equipment & Supplies

1 Answer

...device Fuser thermistor (middle front) - thermal control device Fuser thermistor (rear) - thermal control device These items wear out. Change at the same time. Fuser needs to be rebuilt or

Question about Office Equipment & Supplies

1 Answer

...fuser thermistor 1 reaches primary stable temperature after a warm-up start and the fuser thermistor 2 is less than 90 ° C/194 °F. Causes Fuser unit. Main/Engine PWB. Power source PWB. Fuser

Not finding what you are looking for?
Xerox CopyCentre C20 Black and White Copier Logo

117 questions posted

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Cindy Wells

Level 3 Expert

6164 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...