Xerox Phaser 7700 Laser Printer "7760 toner" Questions

...7760 yellow toner shall install it to 7750 Not yet, check with the supplier and ask if it is compatible with the 7750, if not then exchange the 7760 for a 7750 yellow toner cartridge. Once you open ...

...7760 laser printer has an error Hi mgordonO: The problem is with the toner cartridge or the developer. One or both may be empty. Fel i cyan ATC Sensor.Ett fel upptäcktes i den automatiska ...

how do i inset the reset chip for black toner? I installed the reset chip for the black cartridge in my xerox 7769 laser jet printer. But the printer still says replace black toner buy a new cartrade ...

...7760 saying "black ATC sensor failure - code 009-380", i changed developer and xerox phaser 776 I can not start service mode When you have a sensor failure, you need to replace the black ATC sensor ...

...switch machines with the 7750 toner the machine will not know how much toner is remaining in that toner. Xerox changed this method on the 7760 to use a toner chip to fix this. Hope this helps, ...

Magenta leaving a colorless streak We are getting a light streak in the same place for our color prints. I narrowed down the problem to the magenta toner by doing color step tests. This was the only ...

7760 and its streaking in cyan even though I've change the Imaging Unit and the Toner to fined out what the problem could be you need to open a word doc and sent a blank page to the printer. from this

...7760 toner cartridge not recognized You will need to contact your local Xerox concessionaire for further information. It can be a faulty CRUM chip on the side of the toner cartridge (very un-likely) ...

...7760 , I bought used from a national retail chain. It is set up to use " metered" cartridges. ( Metering enabled). What do I need to do to use regular " non metered" cartridges? ...