Xerox Phaser 7400/DXF Laser Printer "switch" Questions

...cover snapped off, Look for an opening around the edge of the cover , there is a cover interlock switch in there. Note its position and look at the cover to verify there is a tab on the cover to ...

...configuration 1 to 1." This means that you have to go and make the last bit of the Software Switch from 0 to 1. 'Soft-switch 1: Tuning the ringing tone and automatic printing (3100MFP/X)"

...message saying "Close front cover to continue" The cover IS closed. Seems like it might be a relay switch? Is there anyway to reset? I've tried turning it off and back on again... Any help is ...

...tray 2." It is pushed in as far as possible. Has the sensor died or something? check to see if the switch in the printer is not broken, you can take the tray out and look inside and you will see a ...

...it up. If the printer can't "see" the network or PC via the Ethernet or USBconnections when you switch it on, the menu will display "warming up"continuously and when you try to access the menu,

fuser temp. error Start Machine - than press * # UP ok stop - switch off machine and 10 secend after switch on. work and injoy.

...the printer and reset back to defaults. When you adjust the length guides there are 3 little white switch actuators that eith do or do not actuate three little white switches inside the machine

I can't find the power switch to turn on my xerox phaser 8860mfp printer It is on the side. I'm not sure which side, but the side that all the cords plug in. Open the cover on the back right side ...

Xerox colorcube 8570 wont start its crazy we just had one the other day that was acting up. If you have a spare control panel try switching it, look for any lights. If you know your control panel is ...

...get rid of this automatic test page. Thank you In Printer Control panel look for 'Startup Page' and switch to off also check 'Auto Log Print'. Switch to off aswell. ...