imaging unit basket will not close One of my employees opened the imaging unit basket and now it will not close, any suggestions reseat the imaging units and check if the guides in the machine are in ...
image unit depleted Image unit is used up, please replace 108R00691 Phaser 6120 Imaging Unit up to 20,000 pages black/up to 10,000 pages color
imaging unit on my phaser 7750 There is a chip in the bottom of the image unit which stores the image unit life. These can be reset but it requires special hardware and software to do it. You can also
...imaging unit is out Unit displays error message "Imaging unit is out" but print quality is still good. Hi rmcday: Here your problem. The imaging unit creates the image using an electro-photo process. ...
Question about Xerox Phaser Office Equipment & Supplies
...Imaging Unit The Imaging Unit was just replaced on this printer. the message will not clear. There is a spring on the waste section of the imaging unit that often pops off. When that happens it will ...
Question about Xerox Phaser Office Equipment & Supplies
imaging unit to reset on a Phaser 7400 but the fuse will not blow. I have also performed a reset from the hidden menu. The black imaging unit count was reset to zero but the machine is still saying to
...fix it thanks it meants that the image unit needs to be replaced. You can order it from xerox or any computer store. if you have trouble finding a imaging unit, we can help get one for you. thanks ...
Question about Xerox Phaser Office Equipment & Supplies
...imaging unit. AFTER INSTALLING NEW IMAGING UNIT IN Xerox Phaser 7750, the entire page is covered with a film of what looks like black toner? any ideas? Put the old image unit back in, if it prints ...
...imaging unit- what solution now? Did it specify a color you should replace? The machine has 4 image units (CMYK) each with a different part#. Replacing them is easy, no tools required. Open the top ...
Question about Xerox Phaser Office Equipment & Supplies
...imaging unit. This is on a Phaser 6360 I had replaced the fuser - no improvement. I removed the fuser, imaging unit & transfer roller. CAREFULLY using a vacuum cleaner I cleaned all units and the ...
15 questions posted
Usually answered in minutes!
436 Questions
284 Questions
262 Questions
152 Questions
147 Questions