smudged ink prints ok, however ink sumdges Chances are the fuser is not working correctly. How warm is the paper as soon as it leaves the printer? It should be quite warm. The fuser heats the toner ...
Question about Xerox Phaser Office Equipment & Supplies
I have a Xerox Phaser 7400 that prints pages extremely slow. Mainly due to the time it requires to "warm up". For some reason; every time you set the paper type to "plain"; as soon as you send somet ...
Question about Xerox Phaser Office Equipment & Supplies
...colour - it either jams or the colour won't fix to the paper properly - is this a problem with the fuser or could it be faulty toners. I have been using compatible toners recently Your Fuser is most ...
error code SC 542 This is a generic answer, as you didn't state the model machine you had. In general, this is a fusing error code; hot roller is not warming up, or not warming up fast enough... SC542
Question about Xerox Phaser Office Equipment & Supplies
I want to make the machine cloning works Device does not function normally because of code on the screen, and this code is C3425 Memorandum do Fusing warm-up trouble • Detected temperature of the ...
...check the fusing thermistor it may be defective or out of position fusing lamp open,fusing thermofuse open the BCU may be defective check the ac drive board it may be defective ,check also the ...
ricoh aficio mp 2045 sc 542 Description Fusing temperature warm-up error The fusing temperature does not reach the fusing standby temperature of 45C (113F) within 9 seconds [for the B003/B006 (35 cpm)
Question about Konica Minolta Office Equipment & Supplies
Konica Minolta 215 error C0F501 solution Fusing Pressure Roller warm-up failure • The voltage of the Fusing Pressure Roller Thermistor does not increase by five steps within 20 sec. after the predrive
Question about Xerox Phaser Office Equipment & Supplies
my Bizhub 350 is saying malfunction dectected C3452 This code means you have a fuser warm up failure. The fusing unit uses heat and pressure to "fuse" the toner onto the paper. It is located right ...
malware functions eror cod c3451 C3451 is a Warm Up Failure. The fusing unit uses heat a pressure to "fix" the toner onto the paper. This code means that this unit is not heating up properly. You will
37 questions posted
Usually answered in minutes!
436 Questions
284 Questions
262 Questions
152 Questions
147 Questions