Xerox Phaser 7400DN Laser Printer "imaging unit 7400" Questions

Ad

Question about Xerox Phaser Office Equipment & Supplies

1 Answer

...Imaging Unit Error Due to an error on the printer screen, I've recently replaced the black imaging unit on my Phazer 7400 but the error message on the screen won't go away. I've restarted multiple ...

Ad

Question about Xerox Phaser Office Equipment & Supplies

1 Answer

...imaging unit- what solution now? Did it specify a color you should replace? The machine has 4 image units (CMYK) each with a different part#. Replacing them is easy, no tools required. Open the top ...

Ad

imaging unit to reset on a Phaser 7400 but the fuse will not blow. I have also performed a reset from the hidden menu. The black imaging unit count was reset to zero but the machine is still saying to

Question about Xerox Phaser Office Equipment & Supplies

1 Answer

...7400- support -fault code-941 says cyan or magenta toner failure, but the solution says to 1. remove & reinsert the cyan or magenta imaging units. 2. replace imaging units . check out the site to ...

Question about Xerox Phaser Office Equipment & Supplies

1 Answer

...you do not have drive to the red imaging unit area. A gear may have fractured, a motor not runing, which would normally give you a fault code, or a clutch is slipping not driving the red

Question about Xerox Phaser Office Equipment & Supplies

1 Answer

imaging unit basket will not close One of my employees opened the imaging unit basket and now it will not close, any suggestions reseat the imaging units and check if the guides in the machine are in ...

Question about Xerox Phaser Office Equipment & Supplies

1 Answer

...7400 printer color shift - colors shift from dark to lighter from front part of page to back. mulitple parts already replaced including imaging units and transfer belt. have you cleaned the

...to "warm up". For some reason; every time you set the paper type to "plain"; as soon as you send somet Switching both the imaging and engine control boards. Have you replaced the fusing unit

Question about Xerox Phaser Office Equipment & Supplies

1 Answer

Imaging Unit I have replaced the black imaging unit in a phaser 7400 with another one which wasn't brand new. The printer doesn't recognise the fact that a newer imaging unit has been put in and still

Question about Xerox Phaser Office Equipment & Supplies

1 Answer

...Imaging Unit defective The Service manual says:The Drum Phase Sensor for the named Imaging Unit indicates that the drum is out of position.Initial Actions:Reseat the indicated Imaging Unit.Cycle ...

Not finding what you are looking for?
Xerox Phaser 7400DN Laser Printer Logo

74 questions posted

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...