Alpine MRP-M650 Car Audio Amplifier "gauge wire 60 amp" Questions

...gauge speaker wire fuses are all good ground is 4 gauge power is 4 gauge remote is 8 gauge and it sounds not right Hi jimmyjames, How do you have the wires hooked from the sony reciever to the inputs ...

...gauge wiring kit installed with a 100 amp fuse in the fuse holder would I need to put a 60 amp fuse into my fuse holder or would it be alright to keep the 100 amp fuse in? try a 60 amp fuses if it ...

wire must be upgraded. Upgrade to a 4 gauge and upgrade your ground aswell. Same gauge for both. Run a fuse that is equal, to the fuses on your amp or ten above. For ex. 2x 30 fuses on amp should be a

...gauge wiring kit with a 60 amp fuse in the fuse link. As far as your other amp hook up the speakers and tweeters to that but be sure to tune in down and you would need a 8 gauge wiring kit. I hope ...

wire should i use power acoustic 3000 class d mono block What does the fuse on the back say? AWG 4 has around a 60 amp capacity, AWG 2 is about 95 amps. I wouldn't suspect you would need larger than 2

...gauge thats a big power puller also make sure your wires to woofers are correct!and you want a short ground wire and a good spot for it no paint!!if there out of phase that will shut it off BUT you ...

and check the amp fuse check all connections are still good and the remote wire. also make sure your using good gauge wire, if still not working you my have over heated the amp and bang bang bew it up

60 amperes at full power-however you may want to upgrade your power /ground wires to a good 4 gauge set if you dont already have it set up like that-throw an 80-100 amp fuse up front by the battery in

gauge wire, running from the headunit to the amp. All it does is tell the amp when to power up. Since the amp is straight to the battery, it is possible to be on at all times, so you run it to the amp

...gauge wire as an absolute minimum..and ideally larger than that. To troubleshoot this, try hooking a battery (with fuses inline, of course) with heavy gauge wire directly to the amp. Does the problem ...