Insignia IS-LCDTV32 32 in. Television "element tv set scan channel" Questions

TV will reset every time My Element Electronics FLX2211B 22 in. LCD TV will reset every time it is turned on. I need to change the tuner mode from "AIR" to "CABLE" then run a channel scan every time I

my element tv will not show above channel 27 my tv will not show above channel 27 did you set it to cable an then do a channel scan

element TV model no. ELEFW328 HDMI . somehwere in the main menu there should be auto scan. look for that then do it depends on what type of input you set in also Cable,sat, or antenna In the main menu

...tv still does not have picture or sound What type of input and what type of cable have you set to ? (a) Antenna - Coax cable (75 ohm) (b) STB - HDMI (c) DVD - HDMI or (d) DVD - Red+White+Yellow (e) ...

set up my new elements tv with a uverse wireless box. Did a channel scan but still can't find any channels. Help please!! Is this a high def tv? Are you using an hdmi cable, component cable(red green

...Element FLX32FHDH tv. Is there a way where I can set this and not have to keep resetting it? My Element FLX32FHDH seems to lose it's channel list if it is off for 6-8 hours. The channel up and down ...

set top box and do you have the tv on the correct input setting, eg, av input, etc. You can also test this theory by getting another tv that you know has channels and works and pug it into the antenna

...Set tv on tv input and try 3 . If still not working . Go to tv menu and find set to cable and do auto scan . When done try 3 again . be sure cable bos swith on back is set to 3 and not 4. Hope this ...

...TV's it could be that they are set on something other than the Cable Input Option. On your remote press the input button to get an onscreen menu and set them to cable. Otherwise, if you installed ...

tv setup - cannot get past auto channel We just purchased a 39" Class LED Element Model # ELEFW392. We are trying to set it up. We get to the auto channel part, but it never goes above 130 or so. We ...