Maytag MMV1153A Microwave Oven "fuse cover range" Questions

...the mains supply and remove the metal cover. The line fuse holder will be seen once you have the cover removed. Check the fuse continuity with Multimeter, replace if blown. Part No: ...

check the cut-off fuse by removing the cover. it is located near the magnetron tube. replace it if it is blown. if the fuse is ok, this will confirm inverter failure. replace the inverter in this case

...fuse or breaker for the range hood functions? Yes - there is an internal "special" in-line fuse. Most likely it is the fan that has caused it. Clean the fan with switch-cleaner spray and make sure it ...

...MICROWAVE AFTER BEING USED JUST QUIT.NO SMOKE,NO BELLS,OR WHISTLES,ITS KINDA OLD,but worked good,we tested a fuse in it was good,now what??please help remove cover of microwave, find and check the ...

cover to be removed. When it quit working, I had to show the guy how to remove it. He thought he had to take it all the way down. Turned out to be the fuse (which I could not see when I had it opened)

...cover in order to reach it. After you've identified the fuse, you may see if it has blown. If so, you'll have to swap it out for a new one. It might be preferable to seek professional advice if you ...

...cover - check near where the power enters the cabinet ... should be a fuse close-by yes, it's easy. unplug it. open the case. trace the power cord from the plug end. you should encounter an in-line ...

...a fuse with this model? the fuse is usually mounted inside the unit on the same side as the control panel near the back end where the power cord is.......the cover must be removed to get access to

...fuse that you can purchase at any hardware store. Make sure you place the cover back on the unit BEFORE you plug it in. It is not safe to have this area of the microwave exposed with power applied. ...

... the result was the broken plate, a melted cover dish and now the microwave doesn't work. i checked fuses, etc. and all is working. did the process damge the microwave? There is a reset somewhere ...