Ranger SS-3900 240-Channels Base CB Radio "preset" Questions

the squelch not working on a cobra 29 wxnw st sound tracker there are 3 or 4 horse shoe presets inside the radio i suspect that the squelch preset is needing turned up. try turning one up at a time. ...

...the problem, however, this did not solve the problem. I saw this has an internal battery for memory preset retention, which the manual said has to take up to 36 hours for it to charge. The radio has ...

...or driver to connect into usb drive windows xp says cannot recornize, are you trying to upload preset channels? please describe the model number and brand..

Hi . Have Cobra 148..But the Driver tx transistor. as normal bias curant 50ma but the 1969 as none when the preset is adjusted . The 1969 is probably bad. Replace it.

...connect ground then nothing. this is not common it only means you have a good ariel and ground.the preset for the squelsh inside the rig needs turning up if you really need to turn the squelsh

...mic gain. Inside the radio. Thanks in advance!! For ham use which that DX model is for. the FM is preset and cannot be changed with adjustments. SSB andAM can be changed. But from factory should be ...

radio issues i have a galexy 99v and when i put it in my truck it only keys 4 watts. when i put it in my house it keys 8 swings 15. i took it to a cb shop and had it tuned. i was told that it was ...

...included with the Wilson Antenna. Your radio should not need any adjustment and is factory preset and tuned. This is instructions for the "Little Wil", however, you may choose some of the ...

How do you turn up the modulation in a Cobra 19 ultra III? there are horse shoe presets inside the radio you need to turn each one till you get the modulation preset. i think that should do it. ...

...somewhere if you disconnect the battery or the radio fuse.It is simply entered via the station preset buttons.If you make a mistake entering the code, just pull the fuse for the radio for about