...possibility is the S.W.R. actually increases which could be from a amplifier which is not true 50 ohms and/or lack of grounding for the increased power level. [email protected] Communications ...
...lack of power, but I have enough power for it. And it works good (RX and TX) on AM So How can I fix that Problem? Thank you. Its the cap that feeds the first transistor to the first of the finals. It ...
Question about Radio Communications
...the radio will likely make the radio non-compliant and if caught transmitting with more power than permitted or on frequencies for which you lack a license may get you a stiff fine, prison or
...power, and eventually will stop working all together. The other problem may be with the coax, or antenna. Make sure the antenna is not damaged, or the coax isn't damaged, and all connections are in ...
...lack of a good signal from the ant problem. If infact the antenna and coax is good, then take a close look at the output ( final ) transistor. If it's shorted, it doesn't receive well nor does it ...
Question about Midland Radio Communications
...power meter jump or bounce. Twist and pull the cord over its entire length - but pay particular attention to the strain relief points near the mic body and connector as these are typical points of ...
Question about Radio Communications
...proximal location. Thank You. Chargers have higher voltage ratings than the one it charges. It also lacks the needed filters to supply the exact direct current which damaged your equipment but first ...
Question about Cobra Radio Communications
...like to know how to turn the power up, and the modulation, peak and tune my Cobra 29 ltd Chrome is lacking power and lacking modulation I would like to turn the power up and peak it buy donlt know ...
...try different mics or even the so call power mics that help you with you lack of modulation other than that I truly don't know what to say good radio by the way god bless I hope that was
...lack of receive. Defective wiring or switching in the microphone can result in no audio. Or, in many radios, a missing mike will not allow receive, because the mike connection completes the RX ...
6 questions posted
Usually answered in minutes!
45 Questions
32 Questions
10 Questions
9 Questions