JVC KD-G820 CD Player "read error" Questions

...error message. Could not read correct data due to CD ROM. Error 6 CD error message. Could not read data from disc because it is upside-down. Error 8 Tape Drive system defective. Eating tape or ...

...read files error ..try to connect to a pc...and reformat the unit ...becareful to backup any files and give it a try ...anyway ..when those devices start to reading errors...they usually have much ...

...radio it reads error 1 what is wrong? Easy... If you read your owner's manual, page 45, it states "ERROR 1 = IPOD STOPPED SENDING DATA FOR SOME REASON" Solution: Check connection with Ipod

...error that comes up when the laser pickup doesn't read the disc correctly. This happens most of the time because of a dirty lens in the laser pickup. If anyone smokes in the vehicle the smoke may be ...

read error Make sure your (+) lead ,usually the red wire, and your constant wire(orange/yellowish) are spliced completely and not frayed or grounding out, also check your ground take a screwdriver and

...read error THere are a number of problems that can cause a disc read error. The lens can be damaged or very dirty. The motor that moves the les could be stuck or damaged. The disc could be dirty or ...

...error... means the player is unable to read the disc at all. May have a dirty focal lense to laser. clean gently with some windex on a cotton wool bud. It may be a faulty spindle motor that spins the ...

reads dc/dc error @ high volume When i turn up the radio past half way it reads dc/dc error n wont display anything but that. only way to get it to go away is to power the deck back down more than ...

...read error. 1. The disc is not clean or inserted upside down 2. If not the lens is dirty 3. Mechanical error fault. Issue with the mechanics that loads the cd into the spindle motor. Hope this helps ...

...read usb error 1 If you are trying to plug Thumb stick in it and then you get the error message.Your Thumb is inoperational.If you trying to connect IPod thru it and reads error, I would say your USB ...