Onkyo TX-SR502 Receiver "10 device remote" Questions

...device and upto 10 devices. You can even record macro's with these, this means by simply pressing 1 button all your devices will switch on, select correct channels and volume and start playign or ...

...device button you want to display on the remote control Press the NUMBER 1 then count the number of flashes Press the NUMBER 2 etc Press the NUMBER 3 ets Press the NUMBER 4 etc If the LED light ...

...device as well The remote is RM-103 or RM0105 depending on your receiver model. This place claims to have one of each for $59 plus shipping... ...

10 V from the Alpine CDE-9981 receiver but amp light turns on. -RCA connectors from head unit to amp are correct polarity. Thanks, Gary King - HELLO SIR Possibly low on supply or it was not compatible

...remote, from as far away as you can get from the speakers? It would have made sense to delay the noises for 10 or 20 seconds, allowing you time to get out of the room and close the door! According to ...

...10 Hi, Are you sure you programmed it properly? Did you try all the codes? There are quite alot of codes on the manual. Philips TV 0040, 0060, 0063, 0072, 0115, 0116, 0124, 0130, 0150, 0175, 0184, ...

no sound I have a onkyo ts-sr702 when I turne it on sound don't come in till about 10 to 30 minutes. any sugestion. The unit is in protect mode until then. What needs to be determined is why it takes ...

...10-15 min at around 1/4 volume I loose the ability to control it with the remote. I cannot adjust the volume, or change modes...nothing with the remote. However, I can adjust anything directly from ...

...10 minutes to let it cool), and remove obstructions or anything blocking the top vents. If you didn't find anything, think again about what the problem might be (and maybe taking it to a repair shop) ...

...Try this put your remote in the zone 2 mode, select tuner in zone 2 and turn zone 2 volume up to ...