Question about Yamaha Audio Players & Recorders
HOW DO I USE A EXTERNAL AMP LIKE A YAMAHA M-85 FOR MY CENTER CHANNEL ON MY RX-Z11 AV AMP You should have preamp output jacks on the back of the receiver. Hook that up to your external amp input.
Question about Harman Kardon Audio Players & Recorders
external decoder or any other options I believe he avr-5 has 6 channel inputs, what you will need is a dolby digital 5.1 and DTS outboard surround sound processor, say an item as the Technics SH-AC500
...input(s) on the external amp with its speaker(s) attached. Set the external amp's volume (if it has one) to very high, then leave it alone. Run through the Yamaha's speaker location and volume ...
-- If you're using digital input all that advice was a waste of time to create as there is nothing external to the chipset that could affect one input channel. Try a different digital input on the STR
...digital inputs is already incorporated into the receiver. You can access it through MAIN MENU. An external equaliser, I assume for analog inputs, should be connected between corresponding receiver ...
Question about Onkyo Audio Players & Recorders
...external hard drive with videos on it to my receiver for video play back the usb input on front only will play back audio Most receivers are designed to play most audio codecs. They will play ...
input on video 3. If you are not using an external box, use the optical output on the back of the TV to the optical input on video 2. Depending on the manufacturer of your TV, you may have to turn off
...you can use them for volume attenuation. Connect a standard 2 channel audio RCA patch cable between the tape1 rec connectors on the Kenwood and the audio inputs on the external amp. Good luck, ...
...external speakers and one to my receivers aux input, or tape one input. I works, just make sure that the volume on your iMac is not higher than half way, or your sound might be distorted and your ...
...external amp does. According to this link http://www.ecoustics.com/electronics/products/new/642968.html those amps are 2- and 5-channel, respectively. There was a time when I had two bridged-mono ...
29 questions posted
Usually answered in minutes!
269 Questions
261 Questions
161 Questions
135 Questions
85 Questions