Azimuth Head adjust Which screw needs to be adjusted for azimuth head adjust on an Onkyo Integra TA-R77 deck. Service manual just says to adjust azimuth screw without indicating which one or where it ...
akai reel to reel speed adjustment My Akai GX-230D operates, but the tape speed is slow on both the 3-3/4 & 7-1/2 speed settings. I've been told there is an interal adjustment for the tape
Question about ION Audio Audio Players & Recorders
How do you adjust the speed of the cassette tape on this unit? Unit is running too slow. The adjustment holes on the back of the motors do not seem to have an adjustable pot behind them. are your ...
...for it also????? Thanks, Crystal press and hold the "clock" button. The time should start flashing. Adjust the hour by using the square silver buttons for "skip backward" or "skip forward" on the CD ...
Question about Tascam Audio Players & Recorders
Does anyone know if the azimuth is adjustable on the Tascam 322 cassette deck?? Yes, the azimuth is adjustable on the 322 heads.
Question about Technics Audio Players & Recorders
...fault is causing a reduced voltage to the motor. Or if you have just got the machine somebody has adjusted the speed of the machine. Some decks have one motor for both decks. On the base of the ...
Question about Audio Players & Recorders
...up action and stops immediately. There will be either a hole in the top of the motor with a speed adjusting preset. Or there will be one on the printed circuit board. New Motors don't come set up. ...
Question about Audio Players & Recorders
Nakamichi BX 300 tape deck runs slow in play,belts and idler have been replaced There is an adjustment in the motor that sets the speed however you need to have a frequency counter and speed alignment
Question about Teac Audio Players & Recorders
The left side of New W-890R cassette deck plays at triple time. Right side plays normal. Tried to adjust with Pitch control but not the answer. The transistor in the servo capstan motor is probably ...
My pioneer ct-f7171 cassette deck needs a little speed adjustment, where is the pot located? Usually on the back of the servo motor. You need a speed alignment tape and frequency counter or wow and ...
3 questions posted
Usually answered in minutes!
269 Questions
261 Questions
161 Questions
135 Questions
85 Questions