Question about Sewing Machines
...top thread keeps getting wound up in huge knot in the bobbin area Top thread nesting on bottom side is likely either top thread has escaped tension plates or tension too low. Try increasing tension. ...
Question about Singer Sewing Machines
...top thread. As a general rule, if the thread problem appears on the bottom of the fabric, it's a top thread issue. If the problem appears on the top of the fabric, it is a bobbin thread issue. If it ...
top thread, be sure to ALWAYS RAISE the presser foot while threading so the thread will seat properly in the tension disk. If the bobbin thread is loose, then the bobbin tension needs to be tightened.
Question about Sewing Machines
...top thread issue. Be sure to install a brand new needle. Remove the top thread from the machine. ALWAYS RAISE the presser foot and rethread the top thread. Set the top tension to the mid-point and ...
...top thread down into the fabric. Correct tension is when both threads exert equal amounts of pull so that the two threads meet in the middle of the fabric. NOTE: When threading the top thread, ALWAYS ...
Question about Sewing Machines
...Increase the top tension to pull the thread into the material. Google sewing machine tension explained .. Likely top thread tension is too low. If bottom thread (bobbin) is loose check the bobbin ...
Question about Sewing Machines
have reduced the top thread tension to the minimum then it will be necessary to increase the bobbin thread tension. This procedure is specific to machine model. Check operators manual for instructions
Question about Brother Sewing Machines
...Try reducing top thread tension. If tension already at minimum then it may be necessary to increase bobbin tension. This usually is not necessary so let me know results of reducing top thread
...Increase the tension on the top thread. The bobbin tension is so tight, it is dragging all the stitches over to the back side of the fabric, so you need to increase the tension on the top thread ...
Question about Sewing Machines
that is a top thread issue. Increase the top tension. Keep increasing until the bobbin thread is pulled up into the fabric. The tension is correct when the two threads meet in the middle of the fabric
104 questions posted
Usually answered in minutes!
565 Questions
193 Questions
102 Questions
90 Questions
79 Questions