...bobbin case? Has the bobbin case dislodged and moved? there should be two red marks one on the bobbin case and one on the outer holder, are they lining up? Sometimes as these cases are ...
...bobbin case becomes dislodged Janome MC11000 - occasionally my bobbin case becomes dislodged (it actually seems to ''jump'' out of its proper placement) when working in embroidery mode. Also, when ...
Bobbin Case Comes Loose When Sewing When sewing the bobbin case comes dislodged. The plastic drop-in bobbin case, is the worst I have ever seen. It is not staying in place. In front of the case, on ...
Question about Brother Sewing Machines
...can't figure out what you mean, what bobbin seat, do you mean on the bobbin case? maybe on the post where the bobbin case goes? I guess you just have to work on getting the thread off and start
...bobbin case had holes and damage to the plastic which was then catching the thread as the bobbin rotated making the jams happen. Each time, I would dismantle the bobbin holder, clean everything, cut ...
Question about Janome Sewing Machines
...bobbin case held in by magnet on the underside and it will dislodge and move if there is a jam up. This then prevents it from forming stitches correctly. You need to lift out the bobbin case and put ...
...bobbin case in the mahine,can anyone tell me how to fix this problem. Could be a couple of things:Could be a bent needle? please change it for a sharp new one and make sure it goes in correctly, flat ...
...is put down. When attempting to sew, the bobbin tangles and bobbin case is dislodged Re-thread the machine (presser foot up), making sure the thread is going through the opening in the up-take
Question about Elna Sewing Machines
...bobbin case gets dislodged, its just held in place by a magnet but if you have a jam up, often gets moved out of position. Remove top metal plate, take out bobbin, and have a look at the bobbin case, ...
Question about Singer Sewing Machines
bobbin case is dislodged and keeps rotating in the assembly Problem occurred after machine jammed You must make sure that the case is resting against the silver spring at the bottom and slightly to ...
265 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions
