Question about Singer Sewing Machines
...lights flashing when filling bobbin? Machine stops and red lights flash when loading bobbink Singer 7422 keeps stopping with lights flashing when filling ... ...
lights are flashing. When I turn it off and try to wind the bobbin again I can do 3 turns then have to stop and do 3 turns etc till I have wound the bobbin. When I go too fast it stops again and start
flashing lights i have a 440qe.while i was using it the light s starting flashing and the brand new machine stopped working... help You have a warranty - take the machine back to your Bernina dealer ...
will only sew for 3 inches then the lights flash Will only sew for 3 inches then the lights flash (19) and it stops sewing. Will sew another 3 inches and repeat...... check threading on upper thread, ...
...lights flashing My machine will not sew. It starts to beep, then stops and all the lights are flashing. I can't find anything in the instruction booklet that will help. tryrethreading the ...
Question about Singer Sewing Machines
flashing lights of 00( at this point sewing must be stopped to eliminate noise and lights) then can be resumed again but after a few stitches repeats error and then eventually flashes 88. Have to shut
Question about Singer Sewing Machines
does about 8 stiches, and the red light flashes and it stops does about 8 stitches then stops and the red light flases This indicates a thread break, but if thread is not broken I would rethread the ...
Lights are Beeping and Flashing Hi, I just received my sewing machine a couple of days ago and was eagerly trying to use it today. When I depress my foot on the foot peddle, the green light just below
Question about Singer Sewing Machines
...about 8 stiches and stops then the button flashes. what's my problem? Open refrigerator door no lights or settings come on,there are 3 black boxs on the card and one of then is clicking.the ...
Question about Singer Sewing Machines
...lights are flashing The needle is going up and down while bobbin is winding, this just started.. the electronic lights start to flash and machine stops working if I press on the foot control to make ...
263 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions