Singer 7442 Mechanical Sewing Machine "buttonhole problems" Questions

husqvarnaviking Jade 20 buttonhole Lever My Buttonhole lever comes down at a slight forward angle and does not lower enough to reach the buttonhole foot. Has anyone else had this problem? If the ...

...problems making buttonholes with the 1-step buttonhole foot, but unfortunately I can't make a buttonhole big enough with that particular foot. I suppose I could make two smaller buttonholes instead ...

My Janome sewing machine has a buttonhole attachment. I made one buttonhole-no problem. Now it starts the buttonhole, then it stops and the LED displays bL. I have restarted it and changed to a ...

buttonhole stitch problem buttonhole stitch does a perfect buttonhole on sample but the actual buttonhole on the garment does half fine but after it turns to do the other half it wads up thread ...

How do make buttonholes with the Necchi 3102? I followed the instructions from the manual but cannot get the machine to properly make the buttonhole. Any suggestions? Persimmon Thank you R.A. Ellis. ...

buttonhole. I was using a test scrap, thank goodness. I am also having problems with the thread tension, but at the moment I want to make a d*mn buttonhole. set you machine for "zigzag" then: try your

How do I fix the buttonhole pull-down sensor on my machine? I have followed all steps for the one-step buttonhole. The only problem seems to be that the pull down buttonhole sensor doesn't seem to ...

buttonhole on second side was only half the length of first side Test buttonholes were good. The stitching on the second side was much denser. Also appeared that there might be a slight feeding ...

I made a test buttonhole that came out perfectly, but several subsequent attempts have resulted in a buttonhole that is only about 1/4 of an inch. I have rethreaded, removed and replaced the ...