LG LSC121PMA Split System Air Conditioner "room reset" Questions

Ad

Question about Heating & Cooling

1 Answer

...change settings the number does not change Depends on your Tstat. The set point is different from room temp. My tsat show set point and room temp. But to answer you when you set at 72 and room temp ...

Ad

...room tempurature Chahged the battery and reset. Sometimes thermostats Just go bad or are miscalibrated. Sometimes when it is on an exterior wall and it wont show the right room temp due to the wall ...

Ad

...AC run My Honeywell ct8775c thermostat has a peculiar problem. When I set the AC temp for the room, it turns on okay and runs the AC. However, the room temp number goes up while the room gets ...

Question about Heating & Cooling

1 Answer

...room temp is at its maximum reading the heating is not working. I have tried removing the batteries and restarting, the reset button and resetting the identity code, all to no avail. help! Patricia I ...

Question about Fujitsu Heating & Cooling

1 Answer

...ART zone control doesn't work. Heating and cooling system is fine. Zone control panel (eg, Room 1, Room 2 ) light is flashing. Kindly tell me why?? reset the zone system and see if it still ...

Question about Kenmore Heating & Cooling

1 Answer

kenmore 18500 reset will not reset. I change outlet, breaker is good the reset cord is bad replace it if 220 can replace with stove cord ,tie in to old cord use big wire nuts,and electrical tape I did

Question about GE Heating & Cooling

1 Answer

...Room Air Heat/Cool unit. 2.Follow the power cord of the unit. This will normally terminate at the fuse terminal/power reset button., where you can replace the fuse. 3. After the fuse/power reset ...

Question about Hitachi Heating & Cooling

1 Answer

...room , i have cleaned out the filters and unplugged the unit for 10 min and plugged in back in and it only blows cool air , i have it on heating dear sir please reset you air conditioner by it,s ...

...off of the outdoor unit and the wireless signal to the room sensor originates in the indoor unit. Something may have disrupted the output signal to the room sensor and a quick reset MAY do the

Question about Heating & Cooling

1 Answer

On constantly! Doesn't seem to respond to the settings or the room temperature. Have tried resetting and putting in timings and temperatures again, still blasting out heat all night. Set for 5 degrees

Not finding what you are looking for?
Heating & Cooling Logo

188 questions posted

Ask a Question

Usually answered in minutes!

Top LG Heating & Cooling Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

MattS1978

Level 1 Expert

7 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Are you a LG Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...