LG WM2688HWM TROMM SteamWasher "washer run spin cycle twice" Questions

run the washer LG wm1832cw do a number of fills/empties/spins to find that the shocks were bad (It was making loud noises on the spin cycle). Apparently there is a way, by pressing a combo of buttons,

...spin cycle. the washer will drain and keep draining for like 5 minutes the when it is suppose to go into spin cycle it will stop and an error code will come up saying the load is uneven. i even tried ...

...run the Tub Clean on my LG Steam Washer! I first want to say that it is important not to get excited and start pushing buttons randomly, as I think I had been doing for all these months when I ...

...washer-dryer. I've tried pressing the button for 3 seconds in nearly every mode, on or off, locked, unlocked, wash, spin, rinse. I've managed to get it on twice, and both times I have no idea what I ...

...run the tub clean cycle. I used it last night and it worked - no more musty, yucky smell! make sure the washer is draining properly during the spin cycle, if its not it could cause kindof a musty ...

run a sanitary cycle with some bleach and you are good to go. brilliant! I had the same problem with the same symptoms so i ordered the hall sensor from mcm as well put it in and $17.70 + s&h later my

...spin, go a few inches while making a sound like an old car with really bad springs and shocks, then stop. The washer is approximately six years old and is in a laundry room with great ventilation. I ...

...washer back to gain access, disconnected the wiring, turned the thermistor back and forth while still inserted, and reconnected the wiring. Error code gone! A five minute job. Most of the time, the ...

...washer is only a few months old and they are scheduled for tomorrow. d'ear kaycov i'm having the same problem le code won't spin either way and it did leak a bit before this I was hoping to get a ...