LG WM2688H Front Load Washer "le mean clothes" Questions

...mean? Thanks Eric LE means "Overload in Motor" Unplug the washer, remove clothes, wait 15 minutes for motor to cool down. try again. If problem persists you'll need a certified technician. The LE ...

...mean when it attempts spin cycle? is it IE or LE please confirm it. if it is LE code the fixing procedure is given below This usually happens if you're washing on a delicate setting with a moderate ...

...LE symbol may mean Load Exceeded. I turned off the washer, flipped the circuit breaker, (you could also unplug) removed clothing from the washer, waited about 2 minutes and restarted the washer with ...

...LE. what does that mean? It is a motor error • The connector in the LEAD WIRE ASSEMBLY is not connected to the connnector of STATOR ASSEMBLY Reconnect or repair the connector • The hall sensor is out ...

LE mean? Over-sudsing is the main cause of LE error codes. Using non-HE (high efficiency) detergents or too much detergent will cause stress on the motor. In addition, detergent residue can also cause

...LE error code. A good rule is to load the washer until the clothes in the drum are no more than three-fourths of the way up the window of the door. This will allow them sufficient room for tumbling. ...

...LE" can mean a million different things - everything from "your drain motor is burned out" to "your drain filter is clogged" to "you used too much soap". I have found that usually it is the latter. I ...

...LE code came up and there were no clothes in it at the time.Was cleaning it. I know it means over loaded motor so how do I fix it. unplugged it and pushed the play button 3-5 sec waited ten and ...

...LE what does this mean? I have already unplugged it and left it unplugged for more than 30 mins. I still get the error. I have been able to run pure bleach through a cylce. Then I was able to wash ...

replaced sensor on motor and ran find empty put cloths in washer runs for a bit then le code comes up help LE means a locked motor error. sounds like you already replaced the hall sensor so the next ...