...during the wash cycle it is fine, rinse cycle is fine...when it gets to the last spin cycle it leaks water out... The last spin is the final Emptying phase. There has to be a leak somewhere in the ...
Question about LG WM Washing Machines
...during the whole rinse cycle. This is because when you selected your water temperature, you may have selected warm/cold or hot/cold. The hot water came in and you didn't notice any problems. When it ...
...water slowly coming out of the drum holes during rinse cycle. The first tech that service the unit has no knowledge of this new model. Second tech with an impressive lap top computer, said it is ...
...during the whole rinse cycle. This is because when you selected your water temperature, you may have selected warm/cold or hot/cold. The hot water came in and you didn't notice any problems. When it ...
...water level be during a normal cycle ? What about the rinse cycle ? Should the water spray out from the the front top (like in the demo video included on the CD with the washer) or is that just ...
Question about LG WM Washing Machines
during transport or the pump was about to die. check if wires have come off pump and if ok then with a little water in the machine see if you can blow some air back down the drain hose to see if there
...water to almost boiling, then put it in the machine during the wash cycle. This will help clean the lines, during the rinse cycle place a 1/2 cup of vinegar in the unit. Make sure you are using HE ...
...during rinse cycle and "OE" code shows up. we've cleaned filter and keep draining drain hose. is there anything else to do or check? You may have to inspect the entire drain system back to the pump, ...
water from the clothes during the spin. Make sure that a fault in any of the cycle will relate to the specified action, so check the command from the program module and then the executing device be it
water from the clothes during the spin. Make sure that a fault in any of the cycle will relate to the specified action, so check the command from the program module and then the executing device be it
327 questions posted
Usually answered in minutes!
1,845 Questions
401 Questions
243 Questions
234 Questions
195 Questions
