...quick rinse, clean, wash, dry, sanitize, and delay hours (6) all blinking and nothing on the touch panel responds. Make sure there's power getting to the dishwasher. Check for a tripped circuit ...
...power off for a minute and wait for a minute - Restart on Quick Cycle. Paid $1,000 for this dishwasher just over 5 years ago (Want to guess when all warranty expires?) Any suggestions for fixing this ...
Question about Kenmore Dishwashers
quick rinse light began flashing I disassembled the door and control panel (after shutting off power). I disconnected all of the electric connectors from the electronic control. Once I reassembled the
...power going to the element when it should during the operation IF YOUR DISHWASHER IS OVER 3 YEARS OLD IT HAS PROBABLY BLOWN THE HEATER IF THEY ARE USED ON REPEATEDLY LOW TEMP WASHES FAT CAN BUILD UP ...
Question about Bosch Dishwashers
...power wash started showing 199 minutes for both. The "quick" wash was showing 135. The tech didn't know what to do and we had to get Bosch to send a replacement. Now after just one month, we are ...
...back. Regards, BElectric My SHX46L 05UC 24 has 6 Buttons (not including on/off):From Left to right:1) Quick Wash (30 Min. Cycle)2) Top Rack Only3) Power Scrub4) Regular5) Delicate6) Rinse & ...
...power source for 30 minutes to reset the computer, but it didn't change anything. Thank you Aestaie, On the quick wash cycle the machine goes through a heated rinse at 160 degrees. I think what's ...
Quick Clean-up, Rinse Only, Heat Dry and Cancel. I have tried the following key combinations to fix it, but they don't work: 1)High Temp (HT), Heat Dry (HD), HD, HT, HD, HD, start, start... and 2) HT,
Question about Fisher and Paykel Dishwashers
POWER POINT. Take the front draw panel off by pulling the plugs situated on the front behind the draws, the controller is at the top right hand side if it is loose then thats the problem, double sided
181 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: