Konica Minolta bizhub 350 All-In-One Laser Printer "resetting motion sensor lights" Questions

...Motion Failure, check pick-up solenoid and lift up sensor. Reboot machine holding down utility button, then do trouble reset, if nessesary reboot again. If this error occurs again, you have to call ...

...motion, but as the paper is picked up, the paper jam light comes on and the paper isn't pulled through. Do I assume the sensor is damaged? If it needs repair what kind of price am I looking at? Would ...

sensor that detects paper jam or any obstruction might be defective. Aside from that your printer may also experienced a motion carriage error. You can to power cycle the printer & check ink cartridge

...motion. If the end sensor is faulty, the carriage will still attempt to move until it triggers the sensor, but when it gets to the extreme end, the motor will continue to attempt to move it, causing ...

motion but the output is blank white paper. It has printed before. In total I will say printed about 20/25 pages from this printer since I have purchased. Very light use. I am not able to fax anything

...sensor is activated indicating paper jam so the printer will give off a 6A00 code. This may be related to the purge unit being jammed with something and not being able to move. Moving the print head ...