reset drum counter 130f Do not reset drum counter unless the drum has been replaced.. IF not then the copier thinks the new drum and new developer are old. The copier works on the counters that is how
Question about Konica Minolta bizhub Office Equipment & Supplies
...reset the drum count this also "resets" the atdc (automatic toner density control) ratio which must be recalibrated using the F8 mode. The 2 are tied together. You can try doing F8 without replacing ...
reset that error? Have you replace the developer and the drum. First clear the counters for the drum and developer and then replace the drum and developer, then run the required F8. if not the machine
Question about Konica Minolta bizhub Office Equipment & Supplies
...Transfer Belt and Fusing Unit Firmware Reset - http://www.bizhubreset.com Drum and Toner Chip Reset - http://www.chipreset.eu Transfer Belt and Fusing Unit Reset Kit - ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...reset error code cof 32 for developer on konica Di152 Has the developer been replaced along with the drum They are normally replaced as one. If not that is why it is coding out. If not with power off ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...reset imaging unit for konica minolta bizhub211 nothing IS the drum cleaning blade and developer been replaced. Counters are to be cleared before replacing the drum and developer, because the machine ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...drum and developer and resetting the counter will cause image problems and codes due to the fact the copier uses the counters to determine voltages to certain units. and is the only way the machine ...
...RESET THE DRUM LIFE AND STARTER . NEED THE PROCEDURE TO RESET THESE WARNINGS Unfortunately The minds at Konica Minolta have figured out how to make the machine Inoperable if you reset the drum and or ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...by a tech unless your qualified to do it not recommended have tech come out replace drum developer and cleaning blade and have counters reset and f8 run after install. mac windows no ...
Bizhub 250 The drum part number is 4068612. You need to replace developer at the same time, 8938451. You also need to go into service mode and reset the counters and run an f8 after parts are replaced
1,100 questions posted
Usually answered in minutes!
1,023 Questions
417 Questions
261 Questions
256 Questions
111 Questions
