Konica Minolta bizhub C351 All-In-One Laser Printer "tray 1 used" Questions

...tray bit 6=1 for the 2nd tray bit 5=1 for the 3rd tray bit 4=1 for the 4th tray bit 2=0 for the bypass so lets just say you want to put yellow paper in tray 1 to have all the faxes print on yellow ...

tray 1 and rest on tray 4. Is it possible ? Use the Cover options in the PerPages Tab of the driver. This should give you the resultsa you desire. Set the job to come from Tray 4 and then specify the

TRAY 1 WON'T OPEN AFTER LOADING PAPER I was loading paper into the tray and when i went to print it came up with an error code (which has now disappeared so i don't know what it was) Now the tray will

...tray but 1 In properties, shows only tray 1 and tray 2 and bypass, even though there are four trays and bypass. Won't pull from tray 2 evern though there was paper the right size in it. you may have ...

...1 window and specify "Thick 2" and then go back to the main print window and specify Paper Feed "Tray 2" Then go to the copier,, place the stock into tray 2 and match the paper setup for that tray on ...

1-Press the LCT or 3rd tray (large cabinet) inward, and wait for a while.you will see that Tray will open automatically. 2-If the 3rd large tray cabinet is not opening then turn around the machine, at

...tray. Step 1: Download & Install RegistryEasy for Free. Note:If the download link doesn't work you may need to Download it Directly from RegistryEasy Site Here Step 2: Click the "Scan" button. ...

tray setting from "envelope" to "normal". I kept the custom size the same (9 1/2 X 4 1/8) and it started to print. Doesn't make sense, but you can give it try. custom size, use the bypass tray and run

...tray in the duplex mode. Weight paper is selected in duplex mode only from the bypass. So you check that the paper in the tray 1 or tray 2 must be plain paper and in duplex mode it can print

...with a bizhub 35 it's get me a code number c1183 Hi elfethi, This code c1183 is commonly caused by trays in your finisher which are not fully inserted into it's slot. It indicates an elevator motor ...