Konica Minolta bizhub C250 All-In-One Laser Printer "m1 main motor" Questions

Ad

Question about Konica Minolta bizhub Office Equipment & Supplies

2 Answers

...Main Motor (M1) Mechanical Control Board (PWB-M) DC Power Supply (PU1) Step Action WIRING DIAGRAM Control Signal Location (Electrical Component) 1 Check the M1 connector for proper connection and ...

Ad

Question about Konica Minolta bizhub Office Equipment & Supplies

1 Answer

...main motor (M1) has started turning is less than 5% (greater than 4.63 V). ? The measurement taken by the TCR sensor (TCRS) at a time 2.0 sec. after the main motor (M1) has started turning is 19% or ...

Ad

Question about Konica Minolta bizhub Office Equipment & Supplies

1 Answer

bizhub 163, error code M1 (it says call for service) help? What can I do? The error code is a main motor has probably failed you will need a technician to diagnose and replace.

...M1= main motor 1. Does the transport motor (M1) operate during power up? NO, Ensure the connection of the connector (PJ21A) is secure. 2. Replace the transport motor. YES, Check if there is excessive ...

Question about Minolta Office Equipment & Supplies

1 Answer

...is the error code C0000 the Main Drive Motor M1's failure to turn. The lock signal remains HIGH for a continuous 2.0-sec. or more period while M1 is energized. Checkthe main motor or call for

Question about Minolta Office Equipment & Supplies

1 Answer

...Main Motor (M1) has started turning is less than 5% (greater than 4.63 V). - The measurement taken by the ATDC Sensor (UN1) at a time 2.0 sec. after the Main Motor (M1) has started turning is 19% or ...

Question about Minolta Office Equipment & Supplies

2 Answers

...Main Motor (M1) has started turning is less than 5% (greater than 4.63 V). - The measurement taken by the ATDC Sensor (UN1) at a time 2.0 sec. after the Main Motor (M1) has started turning is 19% or ...

Question about Minolta Office Equipment & Supplies

1 Answer

...Main Motor’s failure to turnRelevant Electrical PartsMain Motor (M1) Mechanical Control Board (PWB-M)DC Power Supply (PU1)Step ActionWIRING DIAGRAMControl SignalLocation (ElectricalComponent)1Check ...

Question about Office Equipment & Supplies

2 Answers

...The Main Motor (M1) Lock signal remains HIGH for a continuous 1-sec. period at any time 1 sec. after the Main Motor has started turning Something is keeping the copiers main drive motor from

Question about Minolta Office Equipment & Supplies

1 Answer

...stop and appear the code C0000 C0000 Main Motor malfunction - The Main Motor (M1) Lock signal remains HIGH for a continuous 1-sec. period at any time 1 sec. after the Main Motor has started

Not finding what you are looking for?
Konica Minolta bizhub C250 All-In-One Laser Printer Logo

1,253 questions posted

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6960 Answers

carpediemweb

Level 1 Expert

51 Answers

George Mclaughlin

Level 2 Expert

369 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...