OKI C5500n Printer "fuser hard" Questions

...fuser cable so that it can be pulled through from the front of the printer, and guide the cable through to the front. Warning: Be careful not to damage the cable by pulling too hard or cutting the ...

...the fuser is not a hard task, OKI is rather modular in it's construction. The instructions should come with the new fuser unit, and also you can look for directions on OKI website. Good luck

...hard part... Let the fuser unit cool down before you touch it.. Just remember to unplug the machine, Electronic Static Discharge is not good for the Boards in it, touch the metal chassis before you ...

fuser unit with a brand new one, but this did nothing to change the situation. Please help. It sounds like your main board (the brains) in the printer is fried (I got the same problem with mine). That

hard to see! a tiny bit of black gold, gear oil will help! we have a Lexmark form printer that is sticking, & a tiny...and I DO MEAN tiny drop of oil, does help. 3 in one oil does wonders. The problem

fuser (see diagram on manual) http://www.c5200.co.uk/index.asp?menumode=2&content=30005000fuser http://www.c5200.co.uk/index.asp?menumode=2&content=30005000belt ...you will see a sort of "loom

...is usually sticky or rock hard, this will block the paper from entering the fuser, scrape the hardened toner of with fingernail or something hard, also clean sensors and rollers using a damp

...hard to replace the fuser unit? If your not mechanically incline don't bother to replace. To replace the fuser unit remove transfer belt,back cover,left side cover, two fuser connectors(left side) ...

...the fuser film is out of home position.... Odds are you will need to replace the fuser unit or the fuser film.... The film is hard to replace... It is a lot easier to replace the fuser unit.. Good ...

...the fuser assembly using the front green fuser knob. Does it seem hard to rotate. Most likely there is a frozen bearing in the fuser assembly. Pull in out and check. Replace the parts that are