...can easily remove the rear facing. - You should now have full access to the screen. 4) Follow the ribbon(coming from the screen) to it's connector(white and brown) Gently open the ribbon connector. ...
...screws(left side top & bottom)from LCD, unplug LCD by flipping hinge up on plastic connector, pull ribbon. Remove 6 screws along outer edge of electronic board + 2 screws behind lens. Unsolder 2 ...
...THE SMALL SCREWS THAT ARE UNDER THE COVER PLATES FOR THE USB, VIDEO OUT AND DC INPUT SLOTS. ON THE RIBBON FOR THE FACE AND THE LCD, YOU MUST "LIFT UP" ON THE RIBBON LOCKS. SOME ARE BLACK AND LOOK ...
the ribbon of my lcd need a new one hi, i know a good source for camera flex cables, you could try to contact them from here http://judy-hydigital.diytrade.com/
...have to be careful taking it apart since the back of the camera is connected to the main board by ribbon connector(s). You can carefully lift the tabs on them, and disconnect them, then inspect the ...
...be able to replace the screen yourself. You will need to be careful not to tear any of the small ribbon cables inside. ...
...you can buy those from China by typing in exact name of your camera plus the words "flex cable ribbon". The only trouble is - you've got to be capable of taking camera apart, including lenses ...
.it will be the cheapest way to fix it ...It is actually not that hard to change cause it is just a ribbon with a plug in the end ..The issue is to open it right ..and have patience and not to panic .
...suckers are hard has heck to replace you have to unsolder them and be really careful with that ribbon cable because I can't tell you how many of them I have ripped. it is just sometime easier to ...
to take pictures and then try to download to PC. If it is ok, then the LCD screen may be bad or the Ribbon cable may be misaligned from its connector. Open the camera (a few screws). Lift the pressure
41 questions posted
Usually answered in minutes!
374 Questions
347 Questions
275 Questions
244 Questions
239 Questions
