Ruud UAKA030 Air Conditioner "fan running" Questions

compressor kicks on and runs, fan only hums, flip the fan , runs Compressor runs ok. fan only hums, when you flip the fan around it starts and runs, fan is easy to turn when no power is on... I don't ...

I want to program the fan to run continously How do I program the fan to run continously? I don't see this as a 'programable' feature. The unit is designed for the fan to run anytime the compressor ...

...fan motor, but it runs smoothly when it runs. You need to check the volts at the motor while it's running, to make sure some safety is not shutting it off. Then check the amps on the motor while it's ...

...fan running. There appears to be a short in the unit. Not sure where. The power to the fan is not interrupted completly when the fan shuts down, still feeding voltage to the fan, keeping it running ...

...fan bean running backwards and now wont run at all. Replace the fan motor and capacitor. If you want to go the cheaper route, change the capacitor first and try to run the unit. The cap. is what gets ...

why heater fan will not come on? the heater will start and run but the fan does not come on, it shuts off when fan limit switch clicks the second time. if fan is set to run on therm. it will run fine.

Do you think it could be the fan capasitor? What other solutions do you have ? I hate to just start replacing parts to find the problem or do you feel strongly that it is the fan motor? Compressor ...

...fan is not running yes the fan will shut down during the defrost cycle. But the fan only shuts down during this cycle....other than defrost the outdoor fan motor should be running during a call for ...

i have a payne air handle,heat strips come on but fan dose not run,i turn fan on it dose not run try ac it dose not run,try jumping the thermostat ,fan dose not run burnt wire lead, bad start ...

fan is always running, is this normal operation procedure? check on t-stat ad see if the fan is on or auto with fan on the fan will run all the time with fan on auto it only runs with a call for ...