Frigidaire 24 in. FDB1050RE Built-in Dishwasher "gallery turn" Questions

...to turn it on to wash the dishes. It is the Gallery Series...what can I do to get it to work? Thanks for any help you may give me. Have you tried ot unplug it for 10 minutes then plugging it back

...Gallery dishwasher appros 6 yrs old with an electronic front...just ran the dishwasher..everything fine and now all the lights are flashing and i can't reset and the dishwasher won't turn on. Can u ...

...Gallery dishwasher 900 series has suddenly stopped working. All the lights function, but nothing else happens when I turn it on. No error codes pop up, it simply shows the number of minutes left til ...

frigidaire gallery series FDB125ORES1 wash light blinking, dishwasher won't cycle on. The lights flashed on mine for about three months before smoke started to pour out of it during the drying cycle. ...

...Gallery dishwasher does not move. The dishwasher is ten years old and has worked fine up until now. The lower spray arm does work. you most likely have gunk inside the arm or holes not allowing the ...

...Gallery dishwasher smoke coming out of door. smells like wires burning. You need to replace the blower assembly, common prob after a few years of use. Part number: 154226802 "Blower-Crossflow", ...

The green light says hold to lock. does not go out. can help turn off plz Hi friend, thank you for your post! I understand that the green light for your lock on your Frigidaire dishwasher is not ...

...gallery stove Cannot see anything on the LED panel. Hello mnwpictures - Based on the symptoms you are describing the range may either have a faulty EOC (electronic oven control) or a potential wiring ...

does not drain. screen, drain all seem clear. pumps in but not out Hi, most common faults with dishwashers is a drain fault. Check for any kinked hoses and check the drain spigot under the sink where ...

fridge not working only the refrigerator ice make dispense door keeps opening an closing. No lights inside and no light on the control panel please help DID YOU TURN THE 'ON' SWITCH TO POWER UP THE ...